Dr. JEETENDRAKUMAR VADHER

Faculty Details

Dr. JEETENDRAKUMAR VADHER
  • Designation : Professor
  • Qualification : M.Tech.(IIT, Madras), PhD. (HNGU)
  • Experience : 9 Years
  • Area Of Interest : Production, Industrial Engineering, CAD/CAM

Department Administration

Head of Mechanical Engineering Department

Departmental Administrative Work.

Educational Qualification

  1. Ph. D.in Mechanical Engineering, HemchandracharyaNorthGujaratUniversity, Patan, October 2009
  2. M. Tech. In Mechanical Engineering with Specialization in Manufacturing Engineering from IIT,Madras,Year 1998  (GATE Scholar) 
  3. B E Production Engineering from SSEC Bhavnagar, Bhavnagar University. Year 1995 
  4. Piping Engineer – IIT Bombay, Year 2014.

Work Experience

  1. Shantilal Shah Engineering College, Bhavnagar from 26-12-1995 to 04-07-1996 (6 Months, 08 Days) as a Lecturer in Production Engineering
  2. GCET, V V Nagar from 23-06-1998 to 04-04-2000(1 Year 09 Months, 12 Days) as a Lecturer in Mechanical Engineering.
  3. Government Engineering College, Modasa since 05-04-2000 to 06-12-2004 as a Lecturer in Mechanical Engineering. (GPSC Posting)
  4. Shantilal Shah Engineering College, Bhavnagar since 07-12-2004 to 14-07-2010 as a Lecturer in Mechanical Engineering. (Request Transfer)
  5. Shantilal Shah Engineering College, Bhavnagar Since 15-07-10to 22-12-2015  as Associate Professor in Mechanical Engineering Department (Promotion)
  6. Government Engineering College Palanpur 23-12-2015 to 03-02-2016 as Professor Mechanical (Promotion and Transfer)
  7. Government Engineering College Palanpur 04-02-2016 to 31-03-2017 as Incharge Principal (CTE Order)
  8. Government Engineering College Palanpur 01-04-2017 as Professor in Mechanical Engineering

Skills and Knowledge

  • Manufacturing Engineering, 

  • Manufacturing System, 

  • Sustainable Manufacturing, 

  • Operation Research, 

  • Modeling and Simulation of Manufacturing System, 

  • Flexible Manufacturing System, 

  • Six Sigma, Material Science, 

  • Petrinet Application to System Design

  • Cloud Manufacturing

Course Taught

1. Production Technology

2. Computer Aided Design (CAD)
3.  Computer Aided Manufacturing (CAM)
4. Manufacturing Processes-I
5. Manufacturing Processes-II
6. Operation Research

Training and Workshop

.

Portfolios

  • Institute NBA Coordinator
  • RUSA Coordinator

Research Projects

Registered Ph. D. Supervisor:

  1. R K University, Rajkot
  2. Gujarat Technological University, Chandkheda - Ahmedabad
  3. Rai University, Dholka, Ahmedabad

 Present Research Work:

  • Optimization of Casting Defects using ANN
  • Design and Optimization Agriculture Product
  • Sustainable Manufacturing and Green Manufacturing for Foundry Industries
  • Design and Optimization of Centrifugal Blower
  • Internet of Things
  • Rolling Product defect minimization and sustainability
  • Energy Optimization by IoT.

Publications

International Journal publications:

1

“Petrinets for Project Management and Resource Leveling” Published in International Journal of Advanced Manufacturing Technology, 2000, London. Page No. 516 to 520.

http://link.springer.com/article/10.1007/s001700070059, Citation:http://citations.springer.com/item?doi=10.1007/s001700070059,Impact factor:4.905(http://www.springer.com/engineering/production+engineering/journal/170)Web linkhttp://link.springer.com/journal/170/16/7/page/1

2

“Constraint Logic Programming for timetabling of Commuter rail Services” International Journal of Mathematical Science, New Delhi, 2006.

3

“A Color Petrinet Application to Re-Scheduling of an Activity Network” International Journal of Mathematical Science, New Delhi, 2007.Vol. 6, No.3-4, PP-459-460, Serials Publications.

4

“Optimization in Scheduling of Commuter Services” Asian Journal of Engineering and Research, Vol. 1/Issue I/ July-Sept, 2012/7-12, Year 2012.

5

“A Review on Evaluating of Green Manufacturing for Sustainable Development in Foundry Industries” International Journal of Emerging Technology and Advanced EngineeringWebsite: www.ijetae.com (ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 4, April 2013), Impact Factor: 1.932

6

Thermal Stress Analysis of Electro Discharge Machining, International Journal of Engineering Science and Futuristic Technology A Peer-reviewed journal ISSN : 2454-1125 IJESFT 01 (2015) 034-042.

7

Optimization of Green Sand Casting Process Parameters by Taguchi Method And Artificial Neural Network. International Journal of Modern Engineering Research, IJMER, VOl.5, Issue 5, May 2015.

8

CFD Analysis of centrifugal compressor using Ansys, International Journal of Engineering Science and Futuristic Technology(IJESFT), Volume 2 Issue 10, November-2016, Impact factor: 3.885

9

Optimization of Green sand casting process parameters by Artificial neural network, Trends in Mechanical Engineering&  Technology, VOL 6 ISSUE 2, Page no. 75-80, 2016

10

Mathematical Modeling centrifugal compressor for process industry, International Journal of Engineering Science and Futuristic Technology(IJESFT) November-2016 Volume 2 Issue 10, Impact Factor: 3.885

11

Minimizing the sand casting defects using Taguchi method, Trends in Mechanical Engineering&  Technology, VOL 6 ISSUE 3, 2016

12

Another look to foundry sand quality for Furan No-bake mould system, Proceedings of RK University’s First International Conference on Research & Entrepreneurship (Jan. 5th & Jan. 6th, 2016), ISBN:978-93-5254-061-7 (Proceedings available for download at rku.ac.in/icre), RK University’s First International Conference on Research & Entrepreneurship (ICRE 2016)

13

A Furan No-Bake Binder System Analysis for Improved Casting Quality, International Journal of Metal casting, ISSN 1939-5981, Inter Metal cast: DOI 10.1007/s40962-016-0059-x, Springer, 2016

14

Identification and Quantification of Gases Releasing From Furan No Bake Binder,  ARCHIVES of FOUNDRYENGINEERING, Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences, ISSN (1897-3310) Volume 16 Issue 3/2016 Page No. 5 – 10.

15

Parametric analysis on compressive strength of furan no bakes mould system using ANN, ARCHIVES of FOUNDRY ENGINEERING, Accepted for publication, June 07, 2016, AFE-00020-2016-03

16

Eco friendly Foundry Sand Binders: A Review, Trends in Mechanical Engineering & Technology, ISSN: 2231-1793(online), ISSN: 2347-9965(print), Volume 6, Issue 2, www.stmjournals.com (STM Journals, 2016).

17

Heat transfer enhancement technique Review: Thermal Performance Factor approach- Under review in Beni-Suef University Journal of Basic and Applied Sciences with ISSN- 2314-8535. Elsevier, 5 Oct 2017.

18

Numerical Analysis of Centrifugal Compressor for Process Industry, International Journal of recent trends in Engineering and Research, ISSN: 2455-1457, Impact factor: 4.101, Prof. B M Trivedi, Dr. Jeetendra. A. Vadher, Volume 3, Issue 4, 2017.

http://www.ijrter.com/issue-papers/?select_volume=3&select_issue=4

19

Computational Fluid Dynamics Analysis for Centrifugal Compressor using Advanced Technique, International Journal of Advance Engineering and Research Development (IJAERD), Volume 04 Issue 10, October-2017, Impact factor: 4.72

20

Computational Fluid Dynamics Analysis for Duct line of a  Centrifugal compressor to simulate the dynamic response, International Journal of Advance Engineering and Research Development (IJAERD), Volume 04 Issue 10, October-2017, Impact factor: 4.72

21

Optimization of green sand casting process using Genetic algorithm, Trends in Machine Design, VOL 4 Issue 2, Page No. 25-29, 2017.

22

Different Advances of Metal matrix Composite- A Review, International Journal of Advance Engineering and Research Development,  Mehul G. Mehta, Dr Jeetendra A. Vadher  Volume 4, Issue 8, August -2017, Scientific Journal of Impact Factor (SJIF): 4.72, e-ISSN (O): 2348-4470 p-ISSN (P): 2348-6406,

23

Study of Application and Advantages of  Composite Materials, International Journal of Management, IT & Engineering, Double-Blind Peer Reviewed Refereed Open Access International Journal - Included in the International Serial Directories Indexed & Listed at: Ulrich's Periodicals Directory ©, U.S.A., Open J-Gage as well as in Cabell’s Directories of Publishing Opportunities, U.S.A, Vol. 7 Issue 10, October 2017, ISSN: 2249-0558 Impact Factor: 7.119,

24

Study of Important Manufacturing Processes used for Composite Materials, International Journal of Advance Engineering and Research Development,  Mehul G.Mehta, Dr Jeetendra A. Vadher  Volume 4, Issue 8, August -2017, Scientific Journal of Impact Factor (SJIF): 4.72, e-ISSN (O): 2348-4470 p-ISSN (P): 2348-6406,

25

A Study on Different Failures of Composite Materials, International Journal of Advance Engineering and Research Development,  Mehul G. Mehta, Dr. Jeetendra A. Vadher  Volume 4, Issue 9, September -2017, Scientific Journal of Impact Factor (SJIF): 4.72, e-ISSN (O): 2348-4470 p-ISSN (P): 2348-6406,

26

A Study of Improvement in Different Mechanical Properties for Aluminum Based Metal Matrix Composite, International Journal of Advance Engineering and Research Development,  Mehul Mehta, Dr. Jeetendra A. Vadher  Volume 4, Issue 10, October -2017, Scientific Journal of Impact Factor (SJIF): 4.72, e-ISSN (O): 2348-4470 p-ISSN (P): 2348-6406,

27

A review: Sustainability in Manufacturing Industries – case study of steel re rolling mills. International Journal of modern trends in Engineering and Research, ISSN(Online) 23499745, ISSN Print: 23938161, Volume -4, Issue: 8 Aug-2017, page:68-74. Impact Factor: 4.364

28

Prospects for Energy saving and Increase the Efficiency in Steel Re-Rolling Mills. International Journal of Modern Trends in Engineering and Research, ISSN (Online) 23499745, ISSN Print: 23938161, Volume -4, Issue: 10, Oct-2017, page: 265-268. Impact Factor: 4.364

29

Key Performance Indicators of Steel Re-Rolling Mills for Sustainable Manufacturing. International Journal of Modern Trends in Engineering and Research, ISSN (Online) 23499745, ISSN Print: 23938161, Volume -4, Issue: 12, Dec-2017, page: 311-315. Impact Factor: 4.364

30

Energy Performance Assessment by Means of Processing Heating Assessment and Survey Tool (PHAST) and Feasibility Evaluation of waste heat recuperation in the Reheat furnace at Steel Re _ Rolling mill. International Journal of Modern Trends in Engineering and Research, ISSN (Online) 23499745, ISSN Print: 23938161, Volume -4, Issue: 11, Nov-2017, page: 263-266. Impact Factor: 4.364

31

Empirical Relation of Raw Material and Fuel consumption in Steel Re-Rolling Mills, International Journal of modern trends in Engineering and Research, ISSN(Online) 23499745, ISSN Print: 23938161, Volume -5, Issue: 2, Feb-2018, page:173-176. Impact Factor 5.278

32

Probing Low Productive area in Steel Re-Rolling Mills, Rita k. Jani, J.A.Vadher, Anand D.Kalani, International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-8 Issue-11, September 2019. Page: 2280-2286.

33

Experimental Study of Heat Transfer in Conical Tube Heat Exchanger, Chirag Maradiya, Dr. Jeetendra Vadher, Published in International Journal of Engineering Research and Technology (IJERT) ISSN 09743154, Scopus indexed, active in 2019.


International Conference publications:

1

“Petrinet Application to Project Management” Published in the Proceeding of 14th International Conference on CAD, CAM, Robotics and Factories of Future, 1998, Coimbatore (India). Page No. 853 to 860.

2

“A Stochastic Colored Petrinet for Modeling, Simulation and Analysis of Dynamic Decision Systems” International Conference on Global Manufacturing and Innovation (An Advanced Optimization Technology Approach), Coimbatore, in Collaboration with International Journal of Operation Research, USA, International Journal of Industrial and Systems Engineering, USA, and University of Massachusetts, Dartmouth, USA, 2006.

3

“Logistics Future Directions” Third International Conference on Logistic and Supply Chain Management, PSG Coimbatore, 2006

4

“Modeling of Manufacturing System and Multi Resource Allocation by Criticality Shifting Heuristic.” XI Annual International Conference of Society of Operations Management, Symbiosis Institute of Operations Management, Nasik, 2007, PP-16-17

5

“Dynamic Scheduling of Manufacturing System with Stochastic Timed Petrinet: A Genetic Algorithm Approach” International Conference, IESCON, Arizona, USA, 2008.

6

”A Review on Major Challenges and Technological Solutions for Future Manufacturing Systems” International conference on Science and Technology, VVP College, Rajkot, 2011.

7

“A Review on Evaluating of Green Manufacturing for Sustainable Development in Foundry Industries” International Conference on Contemporarily Issues in Engineering and Technology, Merchant Education Campus, Mehsana, 18 and 20 March 2014.

8

Experimental Investigation on Modern Furan No-Back system for Foundry Industries, Accepted for Publication, 2014

9

An implementation of milk run material supply system in vehicle routing with simultaneous pickup and delivery, Completed and submitted, 2014.

10

Identifying Path to Defect Free Iron Casting Through Evaluation of Sand of FNB Mould System, 3rd Afro, Asian International Conference on science, Engineering and Technology, GEC Bharuch, India, 2015.

11

Greening the Foundry Industry – Past, Present and Future, International Conference on Research, Design and Development in Engineering, Management and Science, Kalol Institute of Technology, Kalol, 26/4/2015.

12

Hot Foundry sand – A Major Problem in Furan No Back Molding System, International Conference on Engineering: Issues, Opportunities and Challenges for Development, ISBN 978-81-929339-1-7, SNPIT and RC, Umrekh, 11 April 2015.

13

Effect of Process Parameters on AL6061 T-6 using Friction stir welding by RSM Method, IASTEM Conference-Meeting, The IASTEM-41st ICMAE, New York, 22 May 2016. International Academy of Science, Technology, Engineering and, Management (IASTEM), USA.

14

A review on development of Adaptive control system for tool vibration minimization and feed optimization for turning centre. ICRISET -2017 International Conference on Research and Innovations in Science, Engineering and Technology, 17-19 Feb 2017. Birla Viswakarma Mahavidyalay, VallabhVidhyanagar.

15

Numerical Analysis of Conical Heat Exchanger, ICRISET, IJTE special issue- 2017, Page No. 18-21.

16

Investigation & Optimization of Process Parameters of Roll Bending machine in realizing Conical Shells in Aluminum 6063, Nimesh M. Patel, Prof. Dr. Jeetendra Vadher, Poster and Paper submitted to International Conference, Frontiers Materials Processing Applications, Research and technology at INDUS, Ahmedabad, Dec 15 to 18, 2019.


National Journal publications

1

“Petrinet, A Tool for Project Management” Published in Journal of Engineering and Technology, S P University, V V Nagar (India). Page No. 47 to 53.

2

“A Review on Manufacturing for Future: Challenges and Strategic Technological Solutions”Journal of Engineering and Technology, S P University, V V Nagar (India).March 2007

3

Numerical Analysis of Conical Heat Exchanger- Published in Indian Journal of Technical Education with ISSN-0971-3034 (ISTE). (Special issue for ICRISET-2017).


National Conference publications:

1

“Decision Support System for Flexible Manufacturing System” Published in National Conference on Automation in Manufacturing (NCOAIM-2003) at    G H Raisoni College of Engineering, Nagpur.

2

“Modeling of Manufacturing System, A Petri Nets Approach” Published in National Conference on Automation in Manufacturing (NCOAIM-2003) at    G H Raisoni College of Engineering, Nagpur.

3

“Performance Modeling Analysis and Simulation of Decision Making Systems, a stochastic Colored Petrinet Approach” National Conference on Emerging Trends in Mechanical Engineering (e-Time 2004), K D K College of Engineering, Nagpur.

4

Evaluation of Gas Porosity Defect in Furan No Back System, National Conference on Innovative and Emerging Technologies, SR Patel Engineering College, Unja, 17 and 18 April 2015.

5

Adopting sand binders considering sustainable foundry – A Review. National Conference on Innovative and Emerging Technologies, SR Patel Engineering College, Unja, 17 and 18 April 2015.


publication of Books:

1

Manufacturing Processes – II, Author by Dr. J A Vadher, Pearson Education India,ISBN 978-81-317-6590-6

2

Product Design & Value Engineering, by Dr. J A Vadher, Books India Publication, Ahmedabad, ISBN 978-83-80867-34-2

3

Manufacturing Engineering – I, Author by M K Vora, J A Vadher, AtulPrakashan, Ahmedabad:http://atulprakashan.org/engineering/diploma/mechanical-engineering/sem-3/manufacturing-engineering-1.html

4

Manufacturing Processes-I, Author by Dr. M G Bhatt, Dr. J A Vadher, Dr. H S Trivedi, Books India Publication, Ahmedabad, ISBN 978-93-80867-0-83

5

Industrial Engineering, Author by Dr. J A Vadher, Dr H S Trivedi, Books India Publication, Ahmedabad, ISBN 978-93-80867-20-5

6

Production Technology, Dr. J A Vadher, Dr. H S Trivedi, Books India Publication, Ahmedabad, ISBN 978-93-80867-54-0

7

MyEBook: http://books.google.co.in/books?id=0b8cIlqJh6AC&pg=PR9&lpg=PR9&dq=jeetendr a+vadher&source=bl&ots=S2Vp7vE7AT&sig=cp4Hvd66jqAFyTNktsireKTOJXo&h l=en&sa=X&ei=PbxnUvDDFoTArAfP0oC4CA&ved=0CFQQ6AEwCQ#v=onepage &q=jeetendra vadher&f=false

8

Computer Integrated Manufacturing, Dr. J A Vadher and Prof. N A Patel, Books India Publications, Ahmedabad, June, 2014,

9

Engineering Economics and Management, Dr. H S Trivedi, Dr. J A Vadher, Prof. B M Trivedi, NiraliPrakashan, Pune. Year 2015. ISBN: 935164982-2, N2465.

10

Springer Chapter: A Novel Way to Schedule Flexible Manufacturing System, Srushti Bhatt, Dr. M B Kiran, Dr. Jeetendra A Vadher

11

Manufacturing Processes, Author by Dr. M G Bhatt, Dr. J A Vadher, Dr. H S Trivedi, Books India Publication, Ahmedabad, First Edition Dec 2019.


Patent Filed

File No     : 201721005100, Date: 13/02/2017,

Title          : A furan no-bake binder system analysis for improved casting quality. 

Professional Institution Memberships

Life Fellow

Indian Institute of Production Engineers, Bangaluru (W/LF/1364)

Life Member

Indian Institute of Industrial Engineering, Mumbai (LM 9467)

Life Member

Institute of Engineers, Kolkata(LM 146505-2)

Member

ISTE, New Delhi (M-62770)

Member

IAENG, Hong Kong (245200)

Senior Member

SMISME, Kuala Lumpur, Malaysia (20200207)

Life Fellow

FSIESRP, Kuala Lumpur, Malaysia (LM171899318)


Expert Lectures

1 Industrial Design, GEC Dahod 
2 Industrial Design and Synectics, SSEC Bhavnagar 
3 Product Design, LDCE Ahmedabad 
4 Production Technology, SVBIT, Gandhinagar
5 Carrier guidance, Luvkush academy, Palanpur

Awards

  1. Received Prestigious “Hariohm Ashram PreritBhaikaka Inter-University Smarak Trust Award” for the Best Publication of “Petri nets Application to Project Management”.
  2. Organized “2-D State Level Workshop on “Computer Based Diesel Engine Test Rig” during 17th&18th October 2002 Sponsored by GUJCOST, Gandhinagar as a committee member.
  3. Nominated for the “Meritorious Educational Excellence Award” from Global Society for Health and Education Growth, Delhi, Year 2002-2003.
  4. Awarded “Bharat Shiksha Ratan Award” from Global Society for Health and Education Growth, Delhi, Year 2003.
  5. Worked as Co-coordinator of “Entrepreneurship and Management Development Center” Sponsored by AICTE, New Delhi at Government Engineering College Modasa, from 12 December 2003 to 6 December 2004.
  6. Computer Training given to Higher Secondary School Teacher as a Faculty, during 1 June to 10 June 2006, under Commissioner of Schools, Gandhinagar.
  7. Additional Duty from Director, Central Salt and Marine Research-Bhavnagar, Government of India, as a Chairman and Technical Advisor of the Potassium Project funded by MHRD, New Delhi.
  8. Member: Board of Syllabus Committee, Gujarat Technological University, Ahmedabad(2008 Onwards).
  9. Chairman: Board of Studies, Mechanical Engineering, Shree Krushnakumarsinhji Bhavnagar University, Bhavnagar.(2006-2008)
  10. Reviewer for Research Paper, International Conference on Science and Technology, VVP College, Rajkot, 2011.
  11. Reviewer for Research Paper: A GUJCOST Sponsored National Conference on Technology and Management, S P College of Engineering, Visnagar, 2012.
  12. Reviewer for Research Paper, International Conference on Science and Technology, VVP College, Rajkot, 22-23 December, 2012.
  13. Member of Editorial Board of “International Journal of Advance Engineering and Research Development” Impact Factor 3.134, Web site: http://www.ijaerd.com/EditorialBoard.php
  14. International Conference Paper Reviewer: ASME Conference: ASME 2014 International Mechanical Engineering Congress & Exposition, IMECHE14, November 14-20, Montreal, Canada https://www.asmeconferences.org/Congress2014
  17. Member of Editor: International Journal of Engineering Science and Futuristic Technology, AD Publications, Web Site: http://www.ijesft.com/EditorialBoard.php
  18. Member of SRC of GTU, Chandkheda, Since Year March 2015.\
  19. Member of Board of Studies at GTU for Diploma Studies, 2019 Onwards.
  20. Hon. Editorial Board Member – Technical editor, Kuala Lumpur, Malaysia, Journal of Automotive Mechanical and Aerospace Engineering Research, ISSN:2229-9270, 15 Feb 2020 onwards.
  21. Hon. Editorial Board Member – Professional Coordinator, Engineering Today, ISSN: 2180-0995, June 2020. Kuala Lumpur, Malaysia,
  22. Hon. Editorial Board Member – Editor and Reviewer, Journal of Automotive Mechanical and Aerospace Engineering Research, Kuala Lumpur, Malaysia ISSN: 2229-9270, 20 June 2020.
  23. Hon. Editorial Board Member – Professional Consultant, Journal of Electrical & Computer Engineering Research, Kuala Lumpur, Malaysia ISSN: 2229-9289, 20 June 2020.
  24. Hon. Editorial Board Member – Consulting Editor, Journal of Engineering Technology and Management Science, Kuala Lumpur, Malaysia ISSN: 2229-9254, 20 June 2020.
  25. Hon. Editorial Board Member – Associate Editor, Journal of Technology Today, Kuala Lumpur, Malaysia ISSN: 2180-0987, 20 June 2020.
  26. Hon. Editorial Board Member – Educational Consultant, Journal of Engineering Technological Research, Kuala Lumpur, Malaysia ISSN: 2229-9262, 20 June 2020.
  27. Hon. Editorial Board Member – Educational Coordinator, The Technology World, Kuala Lumpur, Malaysia ISSN: 2180-1614, 20 June 2020.
  28. http://www.bvmengineering.ac.in/icriset2017/advisoryCommittee.html, International Conference at Birla Viswakarma Mahavidhyalay (BVM), V V Nagar, Gujarat